Open Discussion Group

Moulton F frame standard wheels

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 4, 2013 at 5:13 pm #2495
    Steve Higgins
    Participant

    A Few queries i hope someone can guide me on.

    I ordered a couple of 16″ 28 hole wheel rims to find that the front wheel is a 24 hole!! Darn it!! (The back wheel is 28H and both wheels have the same rim wall patterns on the braking part of the rim so look original?!?)

    Also I know this has been raised many times before but could someone confirm the best cost effective 16″ replacement rims and spokes for the Moulton F Frame.

    I have also purchased a job lot of 16″ Kendo 16″ x 1.75″ tyres which are far too tight to go on the original wheels. These are currently now advertised on ebay!

    December 4, 2013 at 6:02 pm #3991
    Pandora
    Participant

    In ERTRO figures the tyres should be have 349 in the number eg 37-349, 349 is the rim diameter, what is the ERTRO number for your Kendo tyres?

    January 1, 2014 at 12:31 pm #3992
    Dave Minter
    Member

    16 x 1.75″ is 305, a big difference from 349.

    Brompton rims are 349 and 28 hole.

    July 6, 2015 at 12:40 pm #3993
    Steve Higgins
    Participant

    Can anyone help – I ordered a couple of 16″ 28 hole wheel rims to find that the front wheel is a 24 hole!! Darn it!!
    The back wheel is 28H and both wheels have the same rim wall patterns on the braking part of the rim is this original, it looks original?!?
    Does anyone know where I can get a 28H and 24 H (ERTRO 349) rims from the same manufacturer??

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.