[Phil]

So I completed a “first pass” renovation of my Moulton(Fork out ,bearings out ,etc…).Putting the outer cables back was interesting.The frame still has all the original cable loops and I just wondered what the original runs for the cables were,especially at the fork end).Here is a photo of the runs I have used but its not immediately obvious.Everything works fine but for the record I would like to know .I have looked at as many photos of renovated Moultons as I can.
https://www.dropbox.com/s/vxbsts9t77smp4h/20160604_100201.jpg?dl=0
https://www.dropbox.com/s/u4tgfgg5qxxpezu/20160604_100254.jpg?dl=0
Anyone got any original diagrams ,photos?

[Bob Cordon Champ]

I have an un-touched and little-used ’65 deluxe, never dismantled or un-coupled in any way, which has the steel frame loops. Being electronically inept, I could send a photo of any cable run to your Email address. bobcordonchamp@gmai.com

[Author]

Posts