Open Discussion Group

Mudguards

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • March 27, 2015 at 6:16 am #2627
    CLIVE FENNER
    Member

    I have been looking for a pair of alloy mudguards for a speedsix re-build with no luck.
    I am now trying to find someone who may be able to make new ones for me, preferably South London & Surrey area.

    March 28, 2015 at 9:45 pm #4543
    david james
    Participant

    the old bickertons had alloy mudguards, the rear wheel was 16 inch, front 14 inch, try poole bay folders, he probably has a couple lieing around.even if the holes are in the wrong place it might do as a pattern

    March 30, 2015 at 12:29 pm #4544
    William Poole
    Member

    Hi Clive! Are these alloy mudguards to fit Speedsix original 17″ ETRTO 369 rims/wheels, or the ‘more common or garden’ 16″ 349 format?

    March 30, 2015 at 3:01 pm #4545
    CLIVE FENNER
    Member

    They are for the slimmer 369 tyre’s, but I may be able to do some adaptions on wider alloy ones if these were available.

    March 30, 2015 at 5:38 pm #4546
    William Poole
    Member

    Clive! Are you going down/up/over to the MBC Gathering at BoA on Saturday 11th April?

    March 31, 2015 at 12:07 am #4547
    Peter Smitham
    Participant

    Try ebay for brompton mudguards they are 16 inch jobs and not too expensive. Also cjs cycles of southport they do occasionally have silver alloy mudguards.

    March 31, 2015 at 6:51 am #4548
    CLIVE FENNER
    Member

    William, this sounds promising. I hadn’t planned on attending BoA. Let me know if you might be able to help me with the mudguards. I live in Surrey/S.W.London. Contact me on clive.fenner@btinternet.com

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.